Application：
 

TS-AF105 Ash Fusion Tester can be used to determine the ash fusibility of coal and coke ash in power plant, coal industry, metallurgical industry, cement industry, paper manufacturing and institutes.
9 samples each batch
Automatic sample introducing / taking mechanism

High automation, large number of samples/ batch.

①Unique automatic sample introducing/ taking mechanism. Operator only need to take it from the outlet under room temperature.  
②9 samples/batch. Fully automatic, test time/batch is 3 hours. Each month (22 working days) 100 samples more than normal tester.
③Applicable to different test atmosphere. Furnace temperature can be up to1600℃, applicable to ash of vast range of coal and coke.
Optimized design, Low operation cost.
①CE certified high definition camera and radiator reduce heat radiation and realize vivid picture and long service life.  
②Single layer or multilayer design for graphite cup increase utilization efficiency of graphite or bituminous coal. Test atmosphere in furnace is ensured.
③Anti-overflow slot in ash cone support can store spilled ash cone and prevent ash cone stick with the plate. 
④Furnace adopts heat resistant and heat insulation material. Imported material for combustion tube and sample boat.
⑤Heating element by silicon molybdenum rod, resist to high temperature (max. temperature 1800℃), anti-oxidation and low aging.
Real time monitor, Precise result.
①CCD camera real time monitor, new image processing algorithm, quick and accurate analysis of characteristic temperature.   
②Manual observing and camera recording of image at the same port. Good air tightness, low gas consumption.
③Gas leakage detection and alarm function make the instrument safe and reliable.
Smart control, easy to operate.
①Friendly interface, easy operation, real time display of image and data; All data can be stored, printed  and uploaded.
②Windows-based operation system for fully automated testing.
③Multi-control with CAN bus.
④Balance connection and data transfer with RS232 serial port.
Conformance to Standards
ISO540 (2004) - Hard Coal and Coke – Determination of Ash Fusibility
ASTM D1857 - 04 Standard Test Method for Fusibility of Coal and Coke Ash

Specification：

Description	TS-AF105
Standards	ISO540     ASTM D1857    ISO 5074
Sample Quantity	1~9
Temperature Ramp Rate	From 4°C until 20 °C per minutes, adjustable
Image Collection	1 frame per 1°C
Image Resolution	1080 x 1024 pixels
Temperature display	°C / °F
Reducing Gas	CO + CO2 / H2 +  CO2
Standard Calibration	Nickel, Gold, Palladium, and Dextrin Powder
Temperature Control Range	Room temperature to 1600℃
Testing time	3 hours/ per batch(9 samples)
Resolution	1℃
Temperature Control Precision	±2℃
Test Atmosphere	Oxidizing atmosphere
	Weak reducing atmosphere
Power Source	220 V（-15%～10%），50/60 Hz
Dimension	550*850*843mm
Weight	108kg