Have any questions?
robin@pro-trueview.com
0086-18007322239
Water Bath for Solidifying Point Tester
Summary This instrument is designed and made as per the sample processing requirements in GB/T 510 Standard Test Method for Solidifying Point of Petroleum Products. It is used to do the isothermal heat treatment to the sample at room temper...
Summary
This instrument is designed and made as per the sample processing requirements in GB/T 510 Standard Test Method for Solidifying Point of Petroleum Products. It is used to do the isothermal heat treatment to the sample at room temperature~60℃.
I. Main technical features
1. Double shell structure. It has features of high heating speed, good heat prevention and saving energy.
2. Digital temperature controller and stirring motor make the temperature in the water bath uniform and stable.
II. Main technical specifications
1. Power supply： AC220V±10%，50Hz±5%
2. Heating power： Two grades，1000W+650W
3. Stirring motor： Power 6W, rate 1200r/min
4. Temperature range： Ambient +5℃～100℃
5. Temperature control precision： ±0.1℃
6. Constant temperature bath： 20L, double shell
7. Working environment： Ambient -10℃～+35℃，RH ＜85％
8. Temperature sensor： Pt100,RTD
9. Maximum power consumption： 1800W
10. Dimension： 530㎜×400㎜×670㎜（Bath is included）
This instrument is designed and made as per the sample processing requirements in GB/T 510 Standard Test Method for Solidifying Point of Petroleum Products. It is used to do the isothermal heat treatment to the sample at room temperature~60℃.
I. Main technical features
1. Double shell structure. It has features of high heating speed, good heat prevention and saving energy.
2. Digital temperature controller and stirring motor make the temperature in the water bath uniform and stable.
II. Main technical specifications
1. Power supply： AC220V±10%，50Hz±5%
2. Heating power： Two grades，1000W+650W
3. Stirring motor： Power 6W, rate 1200r/min
4. Temperature range： Ambient +5℃～100℃
5. Temperature control precision： ±0.1℃
6. Constant temperature bath： 20L, double shell
7. Working environment： Ambient -10℃～+35℃，RH ＜85％
8. Temperature sensor： Pt100,RTD
9. Maximum power consumption： 1800W
10. Dimension： 530㎜×400㎜×670㎜（Bath is included）
IHWY-ND Water Bath for Solidifying Point Tester Accessories and Documents List
| No. | Name | Unit | Qty | Memo |
| 1 |
HWY-ND Water Bath for Solidifying Point Tester （Including inner and external glass cylinderstirrer devicerubber ring etc.） |
Set | 1 | |
| 2 | Mercury thermometer（0~50℃、50~100℃）scale mark 0.1℃ | Piece | Each1 | |
| 3 | Sensor | Piece | 1 | |
| 4 | Solidifying point tube | Piece | 7 | |
| 5 | Cold filter point tube | Piece | 2 | |
| 6 | Big fixing ring（for casing tube of solidifying test tube） | Piece | 7 | |
| 7 | Fixing ring for solidifying point test tube | Piece | 7 | |
| 8 | Small fixing ring for cold filter point test tube | Piece | 2 | |
| 9 | Silica gel Stopper（3#） | Piece | 2 | |
| 10 | Fuse 10A（Ф6×30） | Piece | 4 | |
| 11 | Round glass | Piece | 1 | |
| 12 | Stopping ring of thermometer（1#） | Piece | 2 | |
| 13 | Plumb bob | Piece | 1 | |
| 14 | Operation Manual | Piece | 1 | |
| 15 | Quality Certificate | Piece | 1 | |
| 16 | Repair Guarantee | Piece | 1 |