Summary
  This instrument is designed and made as per T0604-2011 Penetration Test for Bituminous Materials in JTG E20-2011 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway Engineering and ASTM D5 Standard Test Method for Penetration of Bituminous Materials. It is used to determine the penetration of pavement petroleum asphalt, modified asphalt, liquid petroleum asphalt and emulsified asphalt. It is also suitable to test solid particle, powder, colloid and raw-food materials such as cheese, glycine, butter, cream and leavening. It can be widely used in food industry, highway engineering and other industrial fields.
 
I. Main technical features
1. The needle holder is designed novelly. It can be moved vertically and adjusted roughly and finely without measurable
    frication.
2. It adopts novel heating design. The heating and temperature measuring appliance is separated from water bath. Easy
    to operate.
3. Equipped with automatic temperature controller and high accuracy temperature sensor, the temperature can be set
    conveniently and control precision is high.
4. It adopts newly designed digital meter. The measuring data is stable and reliable.
 
II. Main technical specifications
1. Measurement range： (0～600) penetration scale
2. Resolution： 0.01mm
3. Timing controller： 5s or 60s, can be setted at will，bias within ±0.1s
4. Heating power： 200W
5. Temperature control accuracy： 25℃±0.1℃ （Note: The ambient temperature shall not exceed 20℃）
6. Temperature control mode： High accuracy digital temperature controller
7. Constant temperature bath： Hard glass bath
8. Stirring：  Automatically stirred by magnetic stirrer
9. Standard needle： 2.5g±0.05g
10. Needle holder： It can be adjusted roughly and finely without measurable frication to make the tip aim the sample
      conveniently.
11. Power supply：AC（220±10％）V, 50Hz
12. Dimension：280mm×350mm×700mm
 
III. Optional accessories
1.Grease masher ： It is used in the tests which determine the 
   cone penetration of lubricating grease (or petrolatum)
2.Standard cone： 102.5g±0.05g
3. Other cones：
    1/2 scale cone，1/4 scale cone

ISYD-2801E1 Penetrometer Accessories and Documents List

No.	Name		Unit	Quantity	Remark
1	SYD-2801E1 Penetrometer		Set	1
2	Standard needle		Piece	3
3	Standard weight (50g)		Piece	1
4	Sample container	Φ55×H35（small）	Piece	3
		Φ70×H45（large）	Piece	3
		Φ55×H70（special）	Piece	3
5	Thermometer 0~50 ℃ scale division is 0.1 ℃		Piece	1
6	Glass bath		Piece	1
7	Triangle holder		Piece	1
8	Power supply wire		Piece	1
9	Fuse 3A (Ф5×20)		Piece	2
10	Magnetic stir bar		Piece	1
11	Monitor battery(LR44、1.5Vbutton battery、φ11.5×5)		Piece	1	Optional

 
2. Technical documents
(1) Operation manual                                  1 piece
(2) Quality certificate                                   1 piece
(3) Repair guarantee                                   1 piece 



IISYD-2801E1 Penetrometer's Reagent and Auxiliary Equipments 

No.	Name	Specification	Quantity	Memo
1	Glycerol	500ml	1 bottle
2	Bitumen solvent(Kerosene)	1L	2L/bucket	Bitumen test
3	Talcum powder		500 g
4	Scraper		1 piece
5	Hairbrush	2cm width	2 pieces
6	Electric furnace	1000W	1 piece	Bitumen test

Notes：
1The reagent and equipments for installing the instrument are supplied by end-users themselves.
2The usagemanagement and saving of poisonous and harmful reagentpls operate according to the relative principle.
3PLS read the operation manual and industry standard before using the instrument. 

Download