Wax Content Tester
Summary This instrument is designed and made as per standards T 0615-2011 and ASTM D721 Wax Content Test for Bitumen by distillation in JTG E20-2011 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway Engineering an...
Summary
This instrument is designed and made as per standards T 0615-2011 and ASTM D721 Wax Content Test for Bitumen by distillation in JTG E20-2011 Specification and Test Methods of Bitumen and Bituminous Mixture for Highway Engineering and SH/T0425 Standard Test Method for Wax Content Test of Bitumen. It is used to determine the wax content in the petroleum asphalts by cracking distillation.
I. Main technical features
1. This instrument adopts method of distillation cooling to determine the wax content of sample. The instrument has two
parts: Upper part contains stirring motor, temperature sensor, air flow distributor and hook for sample vessel. Lower part
is the cooling filter.
2. The special designed air flow distributor and hook for sample vessel make the instrument more reasonable and
convenient for use.
3. The constant temperature bath adopts glass material. It has good heat preservation. There is no mist on the
observation window. Convenient to observe.
4. This instrument equips a high accuracy digital temperature controller with clear temperature show and simple
temperature set.
5. This instrument is floor-type structure. It can determine 3 samples at the same time. The test efficiency is high.
II. Main technical specifications
1. Power supply： AC（220±10%）V，50Hz。
2. Heating power： 700W。
3. Cooling power： 1000W。
4. Stirring rate of motor： 1200 r/min。
5. Temperature sensor： Pt100。
6. Refrigeration medium： F22。
7. Temperature accuracy： ±0.1℃。
8. Working environment： -30℃～40℃，RH＜85。
9. Total power consumption： ≤1800W。
10.Overall dimension： 620mm×500mm×1600mm (The air flow distributor is included)
III. Optional accessories
1.Vacuum pump： Model 2XZ-2L/S（Recommend）
2.Vacuum drying oven：Model DZF-6020（Recommend）
3. Burning furnace： Model SYD-0615-1 Cracking furnace（Recommend）
4. Balance： 0.1mg 、0.1g one set for each
| No. | Name |
Unit |
Qty | Memo |
| 1 | SYD-0615 Wax Content Tester | Set | 1 | |
| 2 | Cooling and filtering device (including cooling tube bending tube filtering flaskglass rod etc.) | Set | 3 | |
| 3 | Pyrolysis flask (With a handle) | Piece | 3 | |
| 4 | Sample tube (90 ml) | Piece | 3 | |
| 5 | Thermometer (-30 ℃～+50 ℃)；Scale mark 0.5℃ | Piece | 1 | |
| 6 | Dustproof cover (3 large and 3 small) | Piece | 6 | |
| 7 | Conical flask (250×24) | Piece | 5 | |
| 8 | Stopper for thermometer (Large) | Piece | 1 | |
| 9 | Silica gel tube (outer diameter Ф9×wall thickness1.5; length 400 mm) | Piece | 3 | |
| 10 | Silica gel stopper (5#: 2 pieces 6#: 2 pieces) | Piece | 4 | |
| 11 | Beaker (1000 ml) | Piece | 1 | |
| 12 | Graduated flask (100 ml) | Piece | 1 | |
| 13 | Stopping ring for thermometer (1#) | Piece | 4 | |
| 14 | “O” type rubber ring (Ф31×2.4) | Piece | 3 | |
| 15 | Fuse 15A （Ф6×30） | Piece | 3 | |
| 16 | Power supply wire | Piece | 1 | |
| 17 | Air circuit distributor (including holder) | Set | 1 | |
| 18 | Sample container hook holder | Piece | 1 | |
| 19 | Wax filter bottle（250 mL） | Piece | 3 | |
| 20 | Block(self-made) | Piece | 1 | |
| 21 | T-joint component（one intwo outwith two valves） | Pair | 1 | |
| 22 | Reducer union Φ12.7 to Φ10 | Piece | 1 | |
| 23 | Rubber tube (outer diameter Ф14×wall thickness3.5) | Meter | 8 | Cutted to user's demand |
| 24 | Silica gel tube outer diameter Φ18× thickness 3.0（connected with reducer union and vacuum drying oven） | CM | 8 | |
| 25 |
Operation manual |
Piece | 1 | |
| 26 | Temperature control device usage manual | Piece | 1 | |
| 27 | Quality certificate | Piece | 1 | |
| 28 | Repair guarantee | Piece | 1 |
IISYD-0615 Wax Content Tester's Reagent and Auxiliary Equipments
| No. | Name | Specification | Quantity | Memo |
| 2 | Diethyl ether | Analytical pure 500mL | 3 bottles | |
| 3 | Ethyl alcohol | Industry grade | 20L | New version only need 5L |
| 4 | Petroleum ether 60-90℃ | Analytical pure 500mL | 3 bottles | |
| 5 | Distilled water | Three grade | Some |
Notes：
1The reagent and equipments for installing the instrument are supplied by end-users themselves.
2The usagemanagement and saving of poisonous and harmful reagentpls operate according to the relative principle.
3PLS read the operation manual and industry standard before using the instrument.