Ions that can be detected: Anions: F-, Cl-, NO2-, Br-, NO3-, HPO42-, SO32-, S2O32-, SO42-, formic acid, acetic acid, oxalic acid and so on. Detection range: level of ppb to ppm. Detection limit: 0.1ppb (as Cl-) . Dynamic Range: 103 The line...
Ions that can be detected:
Anions: F-, Cl-, NO2-, Br-, NO3-, HPO42-, SO32-, S2O32-, SO42-, formic acid, acetic acid, oxalic acid and so on.
Detection range: level of ppb to ppm.
Detection limit: 0.1ppb (as Cl-) .
Dynamic Range: 103
The linear correlation coefficient: 0.9998 (in accordance with Cl- )
Baseline noise ≤ 0.05mV/30min
Anionic baseline drift: ≤ ± 1.5mV/30min
Cation: ≤ ± 0.5mV/30min
Transfusion Pumps
Type: Paralleled twin piston reciprocating pump, microprocessor-controlled fixed stroke and adjustable speed.
Structure: chemically inert, PEEK pump head and flow path of non-metallic materials.
PH: 0-14
Controlled mode: Realizing full control of the software or the front panel by Ace
Operating pressure: Maximum 35MPa (5000psi)
Flowing rate range: 0.01 to 15.0ml/min, with 0.001 as increments.
Flowing accuracy: 0.2% RSD
Flowing accuracy: ± 2.5%
Plunger cleaning: double plunger of continuous automatic cleaning.
Overvoltage protection: up 0-35MPa, one unit increments, the lower limit can be set lower than the upper limit of a unit. If it exceeds the limit, the pump automatically stops.
Online degassing: Dual, automatic online.
Temperature conductivity detector
Type: Digital signal control microprocessor.
Conductivity cell drive: 10kHz
Measuring range: 0-15000μS
Temperature range of conductivity cell : room temperature -60 ℃(set by the user)
Temperature Stability: ≤ 0.005 ℃
Conductivity cell material: PEEK
Cell volume: <1μL
Suppressors
Suppression mode: recycling
Inhibiting amount: Anionic 100mmol NaOH
Equilibration time: <15min
Anion suppressor current control: 0-200mA, with 1mA increments.
Physical features of the instrument
Power supply: 220 ± 10V, 50/60Hz
Ambient temperature: 5 ℃ -40 ℃
Humidity: 5% -85% relative humidity, non-condensing
Communication interface RS485 (optional USB )
Power: 150W
Physical features of the instrument
Power supply: 220 ± 10V, 50/60Hz
Ambient temperature: 5 ℃ -40 ℃
Humidity: 5% -85% relative humidity, non-condensing
Communication interface RS485 (optional USB )
Power: 150W