Coulomb Sulfur Analyzer for Testing the Total Sulfur Content
Applications： TS-CS920 can be used to determine the total sulfur content in combustibles such as coal, coke, petroleum and other solid biomass fuels in the field of power plant, coal mining, cement steel factory etc. Test reliable, cost-e...
Test reliable, cost-effective.
Highlights：
①Optimized system design, complete sample combustion, full electrolysis of generated gases and thorough integration ensure accurate results.
②The integrated systems are pre-configured with hardware which can avoid errors with software integration effectively, More accurate and reliable results are delivered.
③Electrolytic cell location device and dilated and thickened platinum electrode plates ensure unanimous agitation and accurate test results.
④Reliable air pump adopted, longer lifetime and lower maintenance frequency can be obtained.
⑤Strong data processing capability by easy to use Windows-based software.
⑥Capable of connecting with network and balance by RS232 interface.
⑦With CAN bus communication technology, one PC controls several analyzers.
|
Description |
TS-CS920 |
|
Test Method |
Coulomb Titration |
|
Sulfur Determination Range |
0.01% - 40% |
|
Standards |
GB/T 214-2007 |
|
Sulfur Resolution |
0.00% |
|
Analysis Time/sample |
3 ~ 6min |
|
Preheating Time |
≤30min |
|
Max. Quantity of sample |
1 |
|
Sample Weight |
10 – 110mg(50±5mg Recommended) |
|
Furnace Temp |
1150℃(coal), 900℃(oil) |
|
Heating Elements |
Silicon Carbide |
|
Temp. Control Precision |
±1℃ |
|
Temperature Sensor |
Thermocouple |
|
Power Requirement |
220V(-15% ~ 10%)50/60Hz |
|
Max. Power |
3kW |
|
Gas Requirement |
Air |
|
Gas pressure |
14 to 45psig (1 to 3 bar) |
|
Sample Introduction and Discarding |
Manual |
|
Gas Flow Checking |
Rotor flow meter adopted Gas flow by visual check |
|
Chemical Reagents |
KI、KBr、Glacial acetic |
|
Humidity |
≤85% |
|
Ambient Temperature |
≤40℃ |
|
Operational Control |
Windows®-based software on external PC |
|
Operation Cost |
Lower cost Desiccant: allochroic silicagel |
|
Dimensions |
680*520*395mm |
|
Weight |
78kg |
|
Advance Calculation |
Yes |
|
Analysis Report |
Yes |
|
Statistics Report |
Yes |
|
System Monitor |
Yes |