Summary

   The instrument is designed to meet the non-magnetic region inclinometer and directional control engineering drilling, exploration drilling, directional drilling, etc. The instrument set of sensors, power supply, digital processing, and other units, a single point work independently and azimuth angle measurements drilling, without cable, no mechanical moving parts, reliable, cost-effective. The instrument can be widely used in engineering, hydrology, oil, coal, geology and other fields.

I.Main technical characteristics

1.The maximum feature of instrument is to realize the single position and sole point measurement under the. well.

2.Using high-precision 24-bit A / D, gravity accelerometer and three-dimensional magneto-resistive sensors,
   measurement data reliability and high accuracy.

3. Application of digital timing and digital storage technology, It independently measures the angulus parietalis and
    azimuth of the drill hole through the single-point mode.

3. The use of seismic design, seismic capability of the instrument, the overall performance of the index much higher than
    conventional mechanical compass inclinometer instruments.

Reasonable price, high accuracy, no cable, the latest technology research crystallization of the oblique technology.

II. Main technical parameters

1. Inclinometer depth: ≤1500;

2. Measuring range and error:

Angle measuring range: 0 ~ 50 °, measurement error: ± 0.2 °;

Azimuth measuring range: 0 ~ 360 °;

When the angle 1 ~ 3 °, the measurement error: ± 5.0 °;

When the apex angle of 3 ~ 50 °, the measurement error: ± 3.0 °;

3. Measuring mode: single point measurement location;

4. Measurement delay time: (1 to 180) minutes adjustable;

5. Power supply: Built-in lithium battery, a charge lasts about 32 hours (new battery);

6. Inclinometer probe Overall: Ф40mm × 1320mm;

7. Environmental temperature: 0 ℃ ~ 55 ℃.

Download