Summary

   The instrument is designed to meet the non-magnetic region inclinometer and directional control engineering drilling, exploration drilling, directional drilling, etc.   The instrument set of sensors, power supply, digital processing, and other units, multi-point manner independent of measurement angle and azimuth drilling, without cable, no mechanical moving parts, reliable, cost-effective. The instrument can be widely used in engineering, hydrology, oil, coal, geology and other fields.

I.Main technical characteristics

1. Using high-precision 24-bit A / D, gravity accelerometer and three-dimensional magneto-resistive sensors,
    measurement data reliability and high accuracy.

2. Application of digital timing and digital storage technology, a maximum of 100 points can be measured at a time, and
    can save 1000 measurement data.

3. The use of seismic design, seismic capability of the instrument, the overall performance of the index much higher than
    conventional mechanical compass inclinometer instruments.

4.With RS232 communication port,all detecting data can be transported and stored in computer to analyze.

Reasonable price, high accuracy, no cable, the latest technology research crystallization of the oblique technology.

II. Main technical parameters

1. Inclinometer depth: ≤1500;

2. Measuring range and error:

Angle measuring range: 0 ~ 50 °, measurement error: ± 0.2 °;

Azimuth measuring range: 0 ~ 360 °;

When the angle 1 ~ 3 °, the measurement error: ± 5.0 °;

When the apex angle of 3 ~ 50 °, the measurement error: ± 3.0 °;

3. Measurement: Fixed-point measurement;

4. Measurement delay time: 1 to 180 minutes;

5. Measuring point interval: 1 to 60 minutes;

6. Measurement points: 1 to 100;

7. Data sets can be saved: 100 groups (measuring point total storage number 1000);

8. Power supply: Built-in lithium battery, a charge lasts about 32 hours (new battery);

9. Inclinometer probe Overall: Ф40mm × 1320mm;

10. Environmental temperature: 0 ℃ ~ 55 ℃.