Summary
  This instrument is designed and manufactured as per standards GB/T 261-2008 Determination of Flash Point - Pensky-Martens closed cup method and ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. It is used to make determination of the closed cup flash point of the petroleum products.
 
I. Main technical features
1. Single chip microcomputer control technique.LCD screen displays.English man-machine interaction interface.The heating power is continuously step-less adjustable.The rate of heating up is exact.Easy setting for parameters.
2. The LCD screen has prompting menu,prompting input operation interface¬.It shows the setted parameters,real-time temperatures and other test parameters.Press the “record”button when the flash point appears.The screen will show and reserve the flash point.
3. The structure is newly design and small.Stainless steel table-board looks clean and beautiful.It can be used as long as equipped with gas or other civilian fuels.It is easy to use and test results exact.
 
II. Main technical specifications
1. Power supply：AC( 220±10% )V, 50Hz.
2. Heating device：(1) The furnace is silicon carbide material. Power is 600W.
　　                             (2) The heating power is adjustable from 0 W to 600W.
3. Heating rate：Procedure A: (5～6)℃/min, Procedure B:(1～1.5)℃/min. 
                                Automatically controlled
4. Stirring device：(1)Stirring motor: BYGH101 stepping motor
                                    (2) Driving mode: flexible shaft
                                    (3) Shaft size: 8mm×40mm             
5. Stirring rate：Procedure A: (90～120)RPM, Procedure B: (250±10)RPM
6. Igniting device： (1) Igniting source: gas（or other civilian fuels，the same below）
                                     (2) Electric ignition. Gas flame diameter:3.2mm～4.8mm
7. Temperature testing probe：RTD, PT100
8. Ambient temperature：≤ 35℃
9. Relative humidity：≤ 85％
10.Maximum power consumption：650W

ISYD-261-1 Pensky-Martens Closed-Cup Flash Point Tester Accessories List and Documents
1. Full set of instrument

Item	Name	Unit	Qty	Remarks
1	SYD-261-1 PMCC Flash Point Tester	Set	1	Including ignition unit oil cup etc.
2	Temperature sensor	Piece	1	Pt100 platinum resistor
3	Driving flexible shaft	Piece	1	Installed by user himself
4	latex tube φ3  0.5m	Piece	2
5	Fuse 5A（Ф5×20）	Piece	2
6	Igniting gun	Handle	1
7	Operation Manual	Piece	1
8	Quality Certificate	Piece	1
9	Repair Guarantee	Piece	1

IISYD-261-1 Pensky-Martens Closed-Cup Flash Point Tester Auxiliary Equipments

No.	Name	Specification	Quantity	Memo
1	Fuel gas	Standard fuel gas steel bottle	1 bottle	Liquefied gas bottle or pipeline gas
2	Fuel gas professional reduce valve		1 piece
3	Fuel gas flexible pipe	Normal	1.2～2 meters

Notes：
1、The reagent and equipments for installing the instrument are supplied by end-users themselves.
2、The usagemanagement and saving of poisonous and harmful reagentpls operate according to the relative principle.
3、PLS read the operation manual and industry standard before using the instrument. 

Download