Have any questions?
robin@pro-trueview.com
0086-18007322239
Carbon Residue Tester(Micromethod)
Summary This instrument is designed and made as per ASTM D4530 and GB/T17144-1997 Standard Test Method for Carbon Residue of Petroleum Products-Micromethod. It is suitable to determine the the amount of carbon residue of petroleum products....
Summary
This instrument is designed and made as per ASTM D4530 and GB/T17144-1997 Standard Test Method for Carbon Residue of Petroleum Products-Micromethod. It is suitable to determine the the amount of carbon residue of petroleum products.
I. Main technical features
1. This instrument adopts all-in-one structure. It consists of two parts: electrical control chamber and high temperature
heating furnace. The design is simple and reasonable.
2. It adopts single chip machine system. The instrument controls the whole procedures automatically according to
program preset.
3. The screen adopts all English interface. Operator can do determination by prompts on the screen even no need to read
the operation manual. Easy to operate.
4. It controls the flow rate of nitrogen, temperature heating rate and preset temperature automatically. Easy to adjust the
flow rate. The heating rate is accurate and temperature control is stable.
5. It collects test data and calculates results automatically. It can print and save the data according to customer’s
requirements.
6. The measurement range of this instrument is 0.10%（m/m）～30.0%（m/m）. The test result is equivalent to
Conradson method if the carbon residue is higher than 0.10%（m/m）.
7. The instrument can also be used to determine the petroleum products composed of distillate oils which carbon residue
is lower than 0.10%（m/m）. But the specimen shall be sampling to 10%（V/V）distillation residue according to
GB/T6536 firstly.
8. It equips a electric balance to achieve the automation of sample weighing and data input.
II. Main technical specifications
1. Power supply： AC（220±10%）V, 50Hz
2. Maximum power consumption： 1600W
3. Temperature of coke chamber： 500℃
4. Temperature control accuracy： ±2℃
5. Heating power： 1500W
6. Ambient temperature： 5℃～35℃
7. Relative humidity： ≤85%
8. Dimension： 520mm×360mm×525mm
This instrument is designed and made as per ASTM D4530 and GB/T17144-1997 Standard Test Method for Carbon Residue of Petroleum Products-Micromethod. It is suitable to determine the the amount of carbon residue of petroleum products.
I. Main technical features
1. This instrument adopts all-in-one structure. It consists of two parts: electrical control chamber and high temperature
heating furnace. The design is simple and reasonable.
2. It adopts single chip machine system. The instrument controls the whole procedures automatically according to
program preset.
3. The screen adopts all English interface. Operator can do determination by prompts on the screen even no need to read
the operation manual. Easy to operate.
4. It controls the flow rate of nitrogen, temperature heating rate and preset temperature automatically. Easy to adjust the
flow rate. The heating rate is accurate and temperature control is stable.
5. It collects test data and calculates results automatically. It can print and save the data according to customer’s
requirements.
6. The measurement range of this instrument is 0.10%（m/m）～30.0%（m/m）. The test result is equivalent to
Conradson method if the carbon residue is higher than 0.10%（m/m）.
7. The instrument can also be used to determine the petroleum products composed of distillate oils which carbon residue
is lower than 0.10%（m/m）. But the specimen shall be sampling to 10%（V/V）distillation residue according to
GB/T6536 firstly.
8. It equips a electric balance to achieve the automation of sample weighing and data input.
II. Main technical specifications
1. Power supply： AC（220±10%）V, 50Hz
2. Maximum power consumption： 1600W
3. Temperature of coke chamber： 500℃
4. Temperature control accuracy： ±2℃
5. Heating power： 1500W
6. Ambient temperature： 5℃～35℃
7. Relative humidity： ≤85%
8. Dimension： 520mm×360mm×525mm
ISYD-17144 Carbon Residue Tester(Micromethod) Accessories and Documents List
| No. | Name | Unit | Qty | Memo |
| 1 | SYD-17144 Carbon Residue Tester(Micromethod) | Set | 1 | |
| 2 | 12 holes tube holder | Piece | 1 | |
| 3 | Big sample tube（Diameter 12×70mm） | Piece | 24 | |
| 4 | Small sample tube（Diameter 12×35mm） | Piece | 24 | |
| 5 | Test tube rack lift hook | Piece | 1 | |
| 6 | Air inlet pipe（ф6 PU pipe 2m） | Set | 1 | Used to connect the steel cylinder and main machine |
| 7 | Exhaust pipe（ф10PU pipe 2m） | Piece | 1 | Used to remove exhaust gas |
| 8 | The top cover of raw coke box | Piece | 1 | Remove packaging from the equipment |
| 9 | Serial Line | Piece | 1 | Electric balance and instrument communication line |
| 10 | Fuse 15A（Φ6×30） | Piece | 2 | |
| 11 | Electric balance(Weighing range 110g accuracy grade I readability 0.1mg) | Set | 1 | Including tecnical manual etc. |
| 12 | Operation manual | Piece | 1 | |
| 13 | Quality certificate | Piece | 1 | |
| 14 | Product warranty card | Piece | 1 |
| No. | Name | Specifiction | Quantity | Memo |
| 1 | Nitrogen | Purity 98.5% | 1 bottle | With reducing valve |
Notes：
1、The reagent and equipments for installing the instrument are supplied by end-users themselves.
2、The usagemanagement and saving of poisonous and harmful reagentpls operate according to the relative principle.
3、PLS read the operation manual and industry standard before using the instrument.