Existent Gum Tester（3 hole motor gasoline type）
Summary This instrument is designed and made as per standards GB/T 8019 Standard test method for gum content in fuels by jet evaporation and ASTM D381Standard test method for gum content in fuels by jet evaporation. It is suitable to determ...
Summary
This instrument is designed and made as per standards GB/T 8019 Standard test method for gum content in fuels by jet evaporation and ASTM D381Standard test method for gum content in fuels by jet evaporation. It is suitable to determine the existent gum content of aviation gasoline and motor gasoline(Not suitable to determine the existent gum content of aviation turbine fuel)
I. Main technical features
1. It equips a specially designed heating bath.The gas circuit is designed reasonably and the effect of evaporation is good.
2. The material of working bench is stainless steel. It has 3 sample holes. Each jet flow can be adjusted and controlled by an
independent flowmeter. It can do 3 determinations at the same time.
3. The instrument is desktop structure. Simple design and easy to operate. It equips an air compressor to make it meet
requirements of standard.
II. Main technical specifications
1. Power supply： AC(220±10%)V，50Hz，2500W
2. Dimension of evaporation bath： φ260mm×130mm
3. Sample positions： 3 positions
4. Dimension of sample positions： φ51mm×70mm
5. Working temperature： (160～165)℃
6. Temperature control： Automatic
7. Temperature display： Digital display
8. Flow display： Displayed by a ball float type flowmeter.
9. Working pressure of air reducing valve： 0.035MPa。
10.Air source： External connection，over (1000±150)mL/s
11.Dimension： 590mm×480mm×340mm(Thermometer holder is not included)
Note：A air compressor is equipped
| No | Name | Unit | Qty | Memo |
| 1 | SYD-8019 Existent Gum Tester | Set | 1 | |
| 2 | Air compressor | Set | 1 | With manual |
| 3 | Air compressor power supply line(Connected by air compressor specification requirements) | Piece | 1 | |
| 4 | Trumpet type nozzle | Piece | 3 | |
| 5 | Thermometer holder | Piece | 3 | |
| 6 | Beaker | Piece | 6 | |
| 7 | Thermometer (-5℃〜400℃ scale division is ±1℃) | Piece | 4 | |
| 8 | Fuse 15A（φ5×20) | Piece | 2 | |
| 9 | Air hose | Piece | 1 | |
| 10 | Sintered glass funnel | Piece | 1 | |
| 11 | Stainless steel forceps (25 cm) | Pair | 1 | |
| 12 | Crucible pliers | Pair | 1 | |
| 13 | Oil and water seperator assembly | Set | 1 | Installed by users |
| 14 | Operation manual | Piece | 1 | |
| 15 | Quality certificate | Piece | 1 | |
| 16 | Product Warranty Card | Piece | 1 | |
| 17 | Timer usage manual | Piece | 1 | |
| 18 | Temperature control device usage manual | Piece | 1 |
IISYD-8019 Existent Gum Tester's Reagent and Auxiliary Equipments
| No. | Name | Specification | Quantity | Memo |
| 1 | Normal heptane | Analytical pure 500ml | 3 bottles | |
| 2 | Methylbenzene | Chemically pure 500ml | 1 bottle | The equal volume is configured as a colloid solvent. |
| 3 | Acetone | Chemically pure 500ml | 1 bottle | |
| 4 | Ten thousandth-Balance | Range 200g | 1 set | |
| 5 | Measuring cylinder | 50ml | 1 piece |
Notes：
1、The reagent and equipments for installing the instrument are supplied by end-users themselves.
2、The usagemanagement and saving of poisonous and harmful reagentpls operate according to the relative principle.
3、PLS read the operation manual and industry standard before using the instrument.