Have any questions? robin@pro-trueview.com 0086-18007322239

You in this column



Optical Emission Spectrometers

Summary TS-W5 Optical Emission Spectrometer bring in the advanced technology from Europe. It is the 4thgeneration Arc/Spark-OES with high performancelowing operating costfor metal analysis and this is the latest research and development of...

Standard: model: TS-W5 E-mail: robin@pro-trueview.com

Summary
TS-W5 Optical Emission Spectrometer bring in the advanced technology from Europe. It is the 4thgeneration Arc/Spark-OES with high performance lowing operating cost for metal analysis and this is the latest research and development of detection equipment. The overall optical design has been enhanced, and with improvements of CMOS technology used to further improve the performance of the W5 while retaining the major benefit of earlier units. The CMOS spectrometer is not only contain the full spectrum characteristics of CCD spectrometer but also the extremely low detection limit for non-metallic elements such as C, S, P, B, As, N etc. The operation is simple and easy to learn. The test result is stable and accuracy. It is a good choice of all common metals for incoming and outgoing product quality control.

Application
TS-W5 Optical Emission Spectrometer(spark OES) is used for applications in metal elemental analysis, trace element analysis for science and industry like Metallurgy, Foundry, Mechanical Engineering, Scientific Research, Product Inspection, Automobile, Petrochemical Engineering, Shipbuilding, Electrics, Aerospace, Nuclear Power, Metallic and Nonferrous Metallic Smelting, Processing and Recycling. It is including full element analysis range, but at same time the element analysis amount can be bespoke.

Detection Matrices:
1.Iron(Fe) and its alloys (Steel alloy, Cast iron, Fe-Low alloy, Fe-Cr steel, Fe-Cast iron, Fe-Cr-cast, Fe-Mn steel, Fe-Tool steel etc.)
2.Aluminium(Al) and its alloys (Al-Si alloy, Al-Zn alloy, Al-Cu alloy, Al-Mg alloy, Pure-Al alloy etc)
3.Copper(Cu) and its alloys (Brass, Copper-Nickel-Zn, Aluminum Bronze, Tin-lead Bronze, Red Copper, Be-Bronze, Si-Bronze etc)
4.Nickel(Ni) and its alloys (Pure Ni, Monel metal, Hadtelloy Alloy, Incoloy, Inconel, Nimonic etc)
5.Cobalt(Co) and its alloys (Co-orientation, Low Co alloy, Stellite 6,25,31, Stellite 8,WI 52, Stellite 188, F)
6.Magnesium(Mg) and its alloys (Pure Mg, Mg/Al/Mn/Zn-alloys)
7.Titanium(Ti) and its alloys
8.Zinc(Zn) and its alloys
9.Lead(Pb) and its alloys
10.Tin(Sn) and its alloys
11.Argentum(Ag) and its alloys
12.Small sample, special size sample and wire detection

Parameters

Item

Index

Optical system

Optical structure

The Paschen Runge construction full vacuum type optics system

Room temperature

35℃±0.5℃

Wavelength range

130-800nm

Focal length

400mm

Grating line

3600m1/mm

First order spectral line dispersion rare

1.2nm/mm

Detector

Multi block high performance linear CMOS array

Average resolution ratio

10pm/pixel

Excitation table

Gas

Rushing argon(99.999%)

Argon flow rate

When excited: 3-5L/min

Standby time: no need for standby traffic

Electrode

Tungsten electrode technology

Purge

Automatic purge function

Make up

Thermal deformation self-compensation design

Analyze the gap

Sample stage:3.4 mm

Excitation light

Type

HEPS

Frequency

100-1000HZ

Discharge current

1-400A

Special technology

Optimization of discharge parameters design

Pre -combustion

High-energy pre-combustion technology

Processor

High end ARM, high-speed data synchronization acquisition and processing

Data collection system

Interface

Ethernet data transmission based on DM9000A

Enter

220VAC 50/60Hz

The requirements of power and environment

Power

Maximum:700W standby:40W

Working temperature

10-35℃(temperature ≥5°C)

Working humidity

20-85%