Summary The instrument is designed to supply the standard low temperature thermostatic water bath for factoryenterpriseconstruction organizationresearch laboratory and collegesuniversities etc.The instrument adopts the imported closed re...
Summary
The instrument is designed to supply the standard low temperature thermostatic water bath for factory,enterprise,construction organization,research laboratory and colleges&universities etc.The instrument adopts the imported closed refrigeration compressor with cold bath and circulating pump.It has the good cooling effect,low noise and is warmly welcome by operators of test units and laboratories.The cold temperature of the instrument can be preset and controlled according to the requirement,As the low temperature liquid source to other equipments,it’s suitable to use in all relative petroleum testing laboratories and all relative highway petroleum&asphalt mixture testing laboratories.
The water bath at 20℃ temperature control is matched to use with SYD-265H-A Petroleum Products Kinematic Viscometer.
I,Main technical characteristics
1.Adopting PID temperature control system,digital display of the temperature,the value of temperature is continuously
adjustable.
2.Using the imported compressor to refrigerate,fast cooling rate.
3.The cold bath with the circulating pump to supply the low temperature liquid to other equipments.
II,Main technical parameters
1. Power supply: AC220V(±10%),50Hz
2. Volume of water bath: 11L
3. Temperature control range:Room temperature~-25℃
4. Temperature control accuracy: ±0.5 ℃
5. Heating device:Electric heater,power 1500W
6. Cooling device:New-type environment friendly refrigeration compressor
7.Work condition: Ambient temperature 5℃~30℃,Relative humidity ≤85%
8. Total consumption: 1350W
9. Outline dimension: 450×380×712 mm(L×W×H)
10.Net weight: 30㎏
IHWY-25 Low Temperature Circulating Thermostatic Water Bath Accessories and Documents List
No. |
Name |
Unit | Qty | Memo |
1 | HWY-25 Low Temperature Circulating Thermostatic Water Bath | Set | 1 | |
2 | Fuse Φ6×30 10A | Piece | 1 | |
3 | Temperature sensor | Piece | 1 | Installed by user |
4 | Circulating tube(Silicon gel tubeinner diameter Φ8× outer diameter Φ12) | Piece | 2 | 2 meters/pc |
5 |
Asphaltene extractor (Condenserextractorgrinding mouth conical flask) |
Set | 1 | |
6 | Electric furnace | Set | 1 | |
7 | Crossuniversal clamp | Set | 1 | |
8 | Titration plateform | Set | 1 |