Ash Fusion Tester
9 samples each batch
Automatic sample introducing / taking mechanism
High automation, large number of samples/ batch.
①Unique automatic sample introducing/ taking mechanism. Operator only need to take it from the outlet under room temperature.
②9 samples/batch. Fully automatic, test time/batch is 3 hours. Each month (22 working days) 100 samples more than normal tester.
③Applicable to different test atmosphere. Furnace temperature can be up to1600℃, applicable to ash of vast range of coal and coke.
Optimized design, Low operation cost.
①CE certified high definition camera and radiator reduce heat radiation and realize vivid picture and long service life.
②Single layer or multilayer design for graphite cup increase utilization efficiency of graphite or bituminous coal. Test atmosphere in furnace is ensured.
③Anti-overflow slot in ash cone support can store spilled ash cone and prevent ash cone stick with the plate.
④Furnace adopts heat resistant and heat insulation material. Imported material for combustion tube and sample boat.
⑤Heating element by silicon molybdenum rod, resist to high temperature (max. temperature 1800℃), anti-oxidation and low aging.
Real time monitor, Precise result.
①CCD camera real time monitor, new image processing algorithm, quick and accurate analysis of characteristic temperature.
②Manual observing and camera recording of image at the same port. Good air tightness, low gas consumption.
③Gas leakage detection and alarm function make the instrument safe and reliable.
Smart control, easy to operate.
①Friendly interface, easy operation, real time display of image and data; All data can be stored, printed and uploaded.
②Windows-based operation system for fully automated testing.
③Multi-control with CAN bus.
④Balance connection and data transfer with RS232 serial port.
Conformance to Standards
ISO540 (2004) - Hard Coal and Coke – Determination of Ash Fusibility
ASTM D1857 - 04 Standard Test Method for Fusibility of Coal and Coke Ash
Specification：
|
Description |
TS-AF105 |
|
Standards |
ISO540 ASTM D1857 ISO 5074 |
|
Sample Quantity |
1~9 |
|
Temperature Ramp Rate |
From 4°C until 20 °C per minutes, adjustable |
|
Image Collection |
1 frame per 1°C |
|
Image Resolution |
1080 x 1024 pixels |
|
Temperature display |
°C / °F |
|
Reducing Gas |
CO + CO2 / H2 + CO2 |
|
Standard Calibration |
Nickel, Gold, Palladium, and Dextrin Powder |
|
Temperature Control Range |
Room temperature to 1600℃ |
|
Testing time |
3 hours/ per batch(9 samples) |
|
Resolution |
1℃ |
|
Temperature Control Precision |
±2℃ |
|
Test Atmosphere |
Oxidizing atmosphere |
|
Weak reducing atmosphere |
|
|
Power Source |
220 V（-15%～10%），50/60 Hz |
|
Dimension |
550*850*843mm |
|
Weight |
108kg |