Coulomb Sulfur Analyzer for Testing the Total Sulfur Content
Test reliable, cost-effective.
Highlights：
①Optimized system design, complete sample combustion, full electrolysis of generated gases and thorough integration ensure accurate results.
②The integrated systems are pre-configured with hardware which can avoid errors with software integration effectively, More accurate and reliable results are delivered.
③Electrolytic cell location device and dilated and thickened platinum electrode plates ensure unanimous agitation and accurate test results.
④Reliable air pump adopted, longer lifetime and lower maintenance frequency can be obtained.
⑤Strong data processing capability by easy to use Windows-based software.
⑥Capable of connecting with network and balance by RS232 interface.
⑦With CAN bus communication technology, one PC controls several analyzers.
|
Description |
TS-CS920 |
|
Test Method |
Coulomb Titration |
|
Sulfur Determination Range |
0.01% - 40% |
|
Standards |
GB/T 214-2007 |
|
Sulfur Resolution |
0.00% |
|
Analysis Time/sample |
3 ~ 6min |
|
Preheating Time |
≤30min |
|
Max. Quantity of sample |
1 |
|
Sample Weight |
10 – 110mg(50±5mg Recommended) |
|
Furnace Temp |
1150℃(coal), 900℃(oil) |
|
Heating Elements |
Silicon Carbide |
|
Temp. Control Precision |
±1℃ |
|
Temperature Sensor |
Thermocouple |
|
Power Requirement |
220V(-15% ~ 10%)50/60Hz |
|
Max. Power |
3kW |
|
Gas Requirement |
Air |
|
Gas pressure |
14 to 45psig (1 to 3 bar) |
|
Sample Introduction and Discarding |
Manual |
|
Gas Flow Checking |
Rotor flow meter adopted Gas flow by visual check |
|
Chemical Reagents |
KI、KBr、Glacial acetic |
|
Humidity |
≤85% |
|
Ambient Temperature |
≤40℃ |
|
Operational Control |
Windows®-based software on external PC |
|
Operation Cost |
Lower cost Desiccant: allochroic silicagel |
|
Dimensions |
680*520*395mm |
|
Weight |
78kg |
|
Advance Calculation |
Yes |
|
Analysis Report |
Yes |
|
Statistics Report |
Yes |
|
System Monitor |
Yes |