Laboratory Pocket Conductivity Tester
model: TRscan10M
Standard:
E-mail: robin@pro-trueview.com
Mid-range pocket conductivity tester, used for measuring the conductivity of drinking water, tap water and general liquids. Accuracy: 1% F.S.
Features:
• Mid-range pocket conductivity tester is equipped with a platinum sensor.
• 1 point push-button calibration allows using the custom calibration solutions.
• Automatic temperature compensation provides accurate reading over the entire range.
• Hold function freezes current reading for easy viewing and recording.
• Auto-Power Off helps user effectively conserve battery life.
• Replaceable electrode module reduces maintenance and replacement cost.
• Waterproof feature to ensure complete protection in harsh environment.
Applications:
• Water and wastewater treatment
• Swimming pools and aquariums
• Aquaculture and hydroponics
• Beverage industry and other industrial applications
Main Parameter:
| Model | TRECscan10M |
| Range | 10~1999µS/cm |
| Accuracy | ±1% F.S |
| Calibration Points | 1 point |
| Calibration Solutions | 1413µS/cm |
| Temperature Compensation | 0~50°C |
| Temperature Coefficient | 2%/°C |
| Cell Constant | K=1 |
| Normalization Temperature | 25°C |
| Hold Function | Manual |
| Power Off | Manual or Automatic (8 minutes after last key pressed) |
| Sensor Type | Order Code: ECSCAN-C1-100K |
| Operating Temperature | 0~60°C, 32~140°F |
| Power Requirements | 3×1.5V "G13A" Batteries |
| Battery Life | Approximately 150 hours |
| Dimensions | 185(L)×40(Dia.)mm |
| Weight | 100g |