Pocket Salinity Tester
High-range pocket salinity tester, 1 to 3 points calibration, setup menu contains the 5 optional parameters. The meter is suitable for measuring the seawater and high concentration liquids. Accuracy: 1% F.S.
Features:
• Multiparameter pocket salinity tester contains the conductivity measurement mode.
• Platinum conductivity cell provides the fast and reliable measurement results.
• 1 to 3 points push-button calibration, automatically recognizes the calibration solutions.
• Automatic Temperature Compensation provides accurate reading over the entire range.
• Auto-Hold feature senses and locks the measurement endpoint.
• Battery indicator shows the remaining battery capacity.
• Auto-Power Off effectively conserves battery life.
• Setup menu allows setting the 5 parameters, including the number of calibration points,
temperature unit, etc.
• Reset feature automatically resumes all settings back to factory default options.
• Replaceable electrode module reduces the maintenance and replacement cost.
• Waterproof feature to ensure complete protection in harsh environments.
Applications:
• Brines and aquaculture systems
• Aquariums (marine fish)
• Food processing
• Other industrial applications
Specifications:
|
Model |
TS-ST20 |
|
|
Salinity |
||
|
Range |
0.00~80.00ppt |
|
|
Accuracy |
±1% F.S |
|
|
Resolution |
0.01 |
|
|
Conductivity |
||
|
Range |
100.0~2000µS/cm, 20.00, 200.0mS/cm |
|
|
Accuracy |
±1% F.S |
|
|
Resolution |
0.01/0.1/1 |
|
|
Calibration Points |
1 to 3 points |
|
|
Calibration Solutions |
1413µS/cm, 12.88mS/cm, 111.8mS/cm |
|
|
Temperature |
||
|
Range |
0~60°C, 32~140°F |
|
|
Accuracy |
±1°C |
|
|
Resolution |
0.1°C |
|
|
Calibration Points |
1 point |
|
|
Measurement Units |
|
°C or °F |
|
General |
||
|
Temperature Compensation |
0~60°C, 32~140°F, Automatic |
|
|
Temperature Coefficient |
|
2%/°C |
|
Compensation Modes |
|
Linear |
|
Cell Constant |
|
K=10 |
|
Data Hold |
|
Manual or Automatic endpoint detection |
|
Power Off |
|
Manual or Automatic (8 minutes after last key pressed) |
|
Reset Function |
|
Yes |
|
Sensor Type |
|
ECSCAN-C10-10K |
|
Power Requirements |
|
2×1.5V "AAA" batteries |
|
Battery Life |
|
Approximately 200 hours |
|
Dimensions |
|
185(L)×40(Dia.)mm |
|
Weight |
|
100g |