Pocket Dissolved Oxygen Meter
Basic pocket dissolved oxygen meter contains a complete setup menu, 1 or 2 points calibration. The meter is suitable for education applications. Accuracy: 0.5mg/L.
Features:
• Basic pocket dissolved oxygen meter comes with a polarographic electrode.
• 1 or 2 points calibration using the air-saturated water or zero oxygen solution.
• Salinity and barometric pressure compensations ensure the reliable measuring results.
• Automatic Temperature Compensation provides accurate reading over the entire range.
• Auto-Hold feature senses and locks the measurement endpoint.
• Battery indicator shows the remaining battery capacity.
• Auto-Power Off effectively conserves battery life.
• Setup menu allows setting the 6 parameters, including the number of calibration points,
temperature unit, concentration unit, etc.
• Reset feature automatically resumes all settings back to factory default options.
Applications:
• Water and wastewater treatment
• Pond water and aquarium
• Aquaculture
• Industrial process monitoring
• Surface and ground water monitoring
• Education and other applications
Specifications:
|
Model |
TS-OM10 |
|
|
Dissolved Oxygen |
||
|
Range |
0.0~20.0mg/L |
|
|
Accuracy |
±0.5mg/L |
|
|
Resolution |
0.1mg/L |
|
|
% Saturation of Oxygen |
||
|
Range |
0.0~200.0% |
|
|
Accuracy |
±2.0% |
|
|
Resolution |
0.1% |
|
|
General |
||
|
Calibration Points |
1 or 2 points |
|
|
Temperature Compensation |
|
0~40°C, 32~104°F, Automatic |
|
Pressure Correction |
|
60.0~112.5kPa, 450~850mmHg |
|
Salinity Correction |
|
0~35g/L |
|
Data Hold |
|
Manual |
|
Power Off |
|
Manual or Automatic (8 minutes after last key pressed) |
|
Reset Function |
|
Yes |
|
Sensor Type |
|
DO100 polarographic probe |
|
Display |
|
LCD |
|
Connector |
6-pin mini plug |
|
|
Power Requirements |
2×1.5V "AAA" batteries |
|
|
Battery Life |
Approximately 150 hours |
|
|
Dimensions |
175(L)×40(Dia.)mm |
|
|
Weight |
100g |