Water Bath for Solidifying Point Tester
model: HWY-ND
Standard: GB -- GB/T510
E-mail: robin@pro-trueview.com
Summary
This instrument is designed and made as per the sample processing requirements in GB/T 510 Standard Test Method for Solidifying Point of Petroleum Products. It is used to do the isothermal heat treatment to the sample at room temperature~60℃.
I. Main technical features
1. Double shell structure. It has features of high heating speed, good heat prevention and saving energy.
2. Digital temperature controller and stirring motor make the temperature in the water bath uniform and stable.
II. Main technical specifications
1. Power supply： AC220V±10%，50Hz±5%
2. Heating power： Two grades，1000W+650W
3. Stirring motor： Power 6W, rate 1200r/min
4. Temperature range： Ambient +5℃～100℃
5. Temperature control precision： ±0.1℃
6. Constant temperature bath： 20L, double shell
7. Working environment： Ambient -10℃～+35℃，RH ＜85％
8. Temperature sensor： Pt100,RTD
9. Maximum power consumption： 1800W
10. Dimension： 530㎜×400㎜×670㎜（Bath is included）
This instrument is designed and made as per the sample processing requirements in GB/T 510 Standard Test Method for Solidifying Point of Petroleum Products. It is used to do the isothermal heat treatment to the sample at room temperature~60℃.
I. Main technical features
1. Double shell structure. It has features of high heating speed, good heat prevention and saving energy.
2. Digital temperature controller and stirring motor make the temperature in the water bath uniform and stable.
II. Main technical specifications
1. Power supply： AC220V±10%，50Hz±5%
2. Heating power： Two grades，1000W+650W
3. Stirring motor： Power 6W, rate 1200r/min
4. Temperature range： Ambient +5℃～100℃
5. Temperature control precision： ±0.1℃
6. Constant temperature bath： 20L, double shell
7. Working environment： Ambient -10℃～+35℃，RH ＜85％
8. Temperature sensor： Pt100,RTD
9. Maximum power consumption： 1800W
10. Dimension： 530㎜×400㎜×670㎜（Bath is included）