>

Bituminous Instruments

Bituminous Mixtures Vibration Wheel Crushed Machine

model: SYD-0703-2
Standard:
E-mail: robin@pro-trueview.com


Summary
  The instrument is based on industry standards relevant provisions of People's Republic of China JTG E20-2011 Standard Test Methods for Bitumen and Bituminous Mixtures for Highway Engineering, in using pneumatic loading work, suitable for hot mix asphalt material and simulate field conditions make asphalt specimen, the specimen can be used to make rutting test, cut into rods or coring may be used for indirect tensile test and residual strain. This instrument can be made of asphalt test block according to European standard or national standard.
    The instrument is calibrated by the measurement and verification of the highway engineering test instrument of the Ministry of communications, and the test data are in line with the same kind of original imported equipment. Stable performance, reliable operation.


I. Main technical features
1. Using MITSUBISHI PLC as the core of the control system, safe, reliable and stable. The system has perfect self-
    protection, have the ability to do long-term work under the complex condition of environment.
2. Use Japanese Mitsubishi touch screen as the man-machine dialogue window, the operation interface is clear and
    good, in Chinese and English dual interface. Setting operational parameters is simple, real-time display work process-
    related data.
3. Rolling vibration mode, using Panasonic inverter, in the (0 ~ 50) Hz, the vibration frequency can be changed arbitrarily,
    vibration compaction simulation scene.
4. Sector steel wheel rolling, rolling speed can be regulated, the operator can select and set rolling beats per minute.
5. Wheel crushed type machine mold dimensions: 300mm × 300mm, 300mm × 400mm, 305mm × 300mm, 305mm ×
    400mm mold thickness dimension: (50 ~ 120) mm, according to the user's request, suitable for use ruts instrument.
6. The maximum compaction load 55KN, equivalent to the maximum static scene rolling wheel.
7. Through four regulator knob, the operator can adjust and set the compaction load levels.
8. Safety protection door. Three protective doors open any one of the protective doors, the equipment expire, power
    outages, protect the safety of the operator.
9. The test sample can be used as the wheel test, cut as the column or the core can be used as the indirect tensile test
    and residual strain test.
10. User-friendly design, easy to insert and remove the mold.
 
II. Main technical specifications
1. Total power: 300W
2. Power supply: AC220V, 50 / 60Hz
3. The maximum wheel grinding load: 55kN
4. Rolling schedule: ± 150mm
5. Rolling speed: adjustable, up to 10 times per minute
6. The specimen plate thickness: 50mm ~ 120mm, adjustable
7. Vibration frequency: 0Hz ~ 50Hz, adjustable
8. Compressed air: 0.6MPa ~ 0.8MPa, 700 L/ min
9. Overall dimensions: 1780mm × 950mm × 1550mm
10. The machine Weight: about 750kg
 


Return

Shanghai Trueview Scientific Instrument Co. LTD
Phone: 0086-18007322239 (Robin)
Fax: 0086-734-8770418
Cell: 0086-15367067787
Wechat: 0086-18007322239
Email: robin@pro-trueview.com
Add: Room 118, Block 21, No.1-42, Lane 83 ,Hongxiang North Road, Wanxiang Town, Pudong New Area, Shanghai City, China
Copyright © 2018.Trueview Scientific All rights reserved.