Jaw Crusher
Application：
TS-JC150 Jaw Crusher is designed to intermittently or continuously crush medium hard mineral and other solid bulk material into analytical size in power industry, coal, chemical processing, metallurgical industry, engineering material, and geological industry, etc.
Highlights：
Traditonal jaw crusher need to adjust minimum jaw plate interval by visual check, its disadvantages are as follows:
①Big deviation, screening experiment is needed to check if the interval is good or not.
②Jaw plate collision due to small interval, service life is affected.
③Dynamic adjustment and self-protection functions, visual display of plate interval, interval can be adjusted during operation.
④Crushing size can be controlled without screening test.
⑤Avoiding the collision of jaw plate, extend the service life.
⑥Jaw plate is made of high-chromium or high-manganese steel (optional).
⑦No fixing is needed. The instrument can be placed on a cement floor due to the rubber bottom and foot.
⑧With unique sliencer, noise below 85 dB.
Specification：
|
Description |
TS-JC150 |
|
Feed Size（mm） |
≤50 |
|
Discharge Size （mm） |
3-13（adjustable） |
|
Productivity（kg/h） |
45-550 |
|
Power Requirement(V) |
380 |
|
Max Power（kW） |
1.5 |
|
Weight（kg） |
200 |
|
Dimension（mm） |
940*640*730 |
|
Speed of Eccentric Shaft(r/min) |
466 |
|
Moisture(Total Moisture) |
≤12% |
|
Description |
SDJC150*125a |
|
Feed Size（mm） |
≤100 |
|
Discharge Size （mm） |
6-38（adjustable） |
|
Productivity（kg/h） |
1000-2000 |
|
Power Requirement(V) |
380 |
|
Max Power（kW） |
4 |
|
Weight（kg） |
420 |
|
Dimension（mm） |
1245*700*1010 |
|
Speed of Eccentric Shaft(r/min) |
466 |
|
Moisture(Total Moisture) |
≤12% |