Product Description
This apparatus is widely used in material analysis of various industries, such as iron and steel, non-ferrous metal, metallurgy, machinery, chemical equipment, quality inspection system and so on. It is also used in , routine identification and analysis in metallic smelt industry.
1.Manage blast furnace process control by various processes of blast furnace celerity analysis.
2.Identification of product specifications.
3.Material checking and acceptance.
4.Quality inspection.

 

Description
TS-750 Optical Emission Spectrometer is the best assistant for rapid quantitative analysis of metallurgical furnace and metallic quality monitoring. Its accuracy and stability meet laboratory requirements and can make measurements for dozens of matrix based on elements such as Fe,Al,Cu,Ni,Co,Ti,Mg,Zn,Sn,Pb, etc. It is widely used in steel, metallurgy, foundry and machinery for IQC, QC and OQC.
TS-750 is a design of zero fault operation, which requires little maintenance and offering high reliability and convenience.

Features
1.750 mm focal length grating design with palmer type-runge device which has the features of high vacuum, high resolution and high sensitivity etc.
2.Adopt high stability digital sources. You can choose different excitation parameters to analyze different samples which can get the best analysis results.
3.The automation is very high which adopts high integration of the acquisition and control system.
4.The photomultiplier tubes from Hamamatsu which has the features of low dark current, high signal-to-noise ratio, long service life etc.
5.It can be used for variety of bases such as Fe, Al, Cu, Co, Ni, Pb, Mg, Zn, Sn etc.
6.The temperature of the optical part is stable which ensure the instrument running well and reduce the requirement of the environment.
7.The system adopts independent power supply and becomes unit which is easy to use and simple maintenance.
8.The computer adopts Windows 7 system and English operation software which is simple to understand.
 

Allocating and analyzing channel and quantitative work scale
Major Features
1.The human oriented design, the standardized and modularized manufacture make the apparatus smaller.
2.The core components are all imported, which strengthen the stability and reliability of the apparatus.
3.We adopt the advanced foreign technologies of excitation source and design the excitation source of high energy, high stability by our own to fulfill the needs of ultrahigh content and trace analysis.
4.It adopts overall exit slit using technology which is convenient for choosing passage and regulating.
5.The high voltage of the PHT in the apparatus is controlled directly by computer and regulated by software, which improved efficiency of the passage.
6.In the apparatus, there is an automatic constant temperature system which solve the problem of bad effects to the optics system caused by changing temperature.
7.The multi-language operation software and flexible configuration enable the apparatus more humanistic.
8.This apparatus can analyze various kinds of matrix, such as Fe, Co, Ni, Ti, Cu, Al, Pb, Mg, Zn and Sn.

Technical parameters

Optical System:	Excitation Desk:
Palmer type - runge device Focal length of grating: 750mm Wavelength range: 130-650nm	Open spark desk All kinds of fixture for special applications A cyclic flow saves the argon gas design Can quick swab incident window and replace Gap analysis: 4 mm
Excitation Light Source:
Programmable pulse digital light source Discharge frequency: 100 -1000Hz High-energy pre-combustion technology Ignition pulse amplitude: +15KV Peak pressure of main loop: 400VDC
	Working Environment and Power Supply:
	Power supply: 220V±10%,50Hz±2% Max power: 1000W, standby 200W Working temperature: 10-30℃ Relative humidity: 20-80%RH
Requirement of Argon Gas:
Purity>99.996% Inlet pressure: 0.5MPa Excitation flow: 3L/min	Size and Weight:
	Size: L112×W75×H92cm Weight: 266 kg / 586 lb