Automobile Emission Gas Analyzer（including printer）
model: TR-GAS-5020
Standard:
E-mail: robin@pro-trueview.com
Introduction:
TR-GAS-5020 emission gas analyzer can be used for measurement of the concentration of automobile emission gas CO ,CO2 ,HC ,O2 and NO (optional). It is based on the pulsable infrared source and single source two beams non-dispersion infrared (NDIR) method, this analyzer is designed with portable and smaller physical dimensions.
Applications:
The general application is for automobile emission check station or car repair garage.
Features:
1、Proprietary Infrared(NDIR) gas sensor.
2、Can measure gas concentration of CO ,HC ,CO2 ,O2 ,NO (optional) simultaneously.
3、With 320*240 LCD and 6 keypads for operation.
4、Air/fuel ratio calculation and display automatically.
5、Auto-zero calibration with air.
6、Oil temperature and RPM interface.
7、Plug in Printer optional.
8、RS-232 interface and optional software.
Specifications:
Measurement range：
CO：0-10% CO2：0-20 % HC：0-9999ppm O2：0-25% NO：0-5000ppm( optional)
Error：
HC：±12ppm or±5% (relative)
CO：±0.06% or±5% (relative)
CO2：±0.5% or±5% (relative)
O2：±0.1％or±5% (relative)
NO：±25ppm or±4% (relative)
Resolution：HC：1 ppm CO：01 % CO2：0.01 % O2：0.01 % NO：1 ppm
Response time：Less than10s（NDIR）
Warming up：10min
Power：AC220V±10%,50HZ±1HZ
Weight:6.5kg
Dimension:266mm(width)×360mm(depth)×183mm(height)